Tiberius Arms Parts

[THE JEW (RaVeN)]

First crack for you guys before it hits the rest of the web. Free delivery in the London and Norwich area at a time mutually convenient.

1. "Rain Cover"

-will fit any Tiberius Arms stock threaded barrel tip
-approximately 6" long (that's what she said!)
-turns your pistol into a CQB close quarters small arm
-modify it for greater suppression if you like (check your local laws)

$20



2. ASA Adjustable Stock

-will fit any ASA (tested with a Bob Long Marq Rapper and Brass Eagle Stingray to verify). This means you can use it with ANY gun rather than be limited to one model
-run it in the ASA with an ON/OFF and a remote line
-mount it on any marker using a spare ASA on the the grip frame and a remote line hook-up to the other ASA
-approximately 6" of adjustable length
-comes with sling mount

$20

[[PX] Nebuchadnezzar]

for the ASA stock, can you hook up air through it?

[THE JEW (RaVeN)]

for the ASA stock, can you hook up air through it?

Not without some modification/an extra piece.

It is usually used in conjunction with the T8.1/9.1 back block (see attachment). The remote line nipple is installed into that. You can replicate that functionality in a couple of easy ways:

1. Get a bottom grip frame ASA and nipple like the links below. Screw the nipple into the one side port and hook the opposite side port wherever it needs to go. This would give you a setup that would like you run remote with stock and allow to switch over to tank only easily.

http://www.ansgear.com/Taso_Bottomline_ ... 2dchrm.htm


2. Use a tank extender (see attachment). Screw the nipple into one of the side ports. Makes for a setup that you can easily bounce between guns.


3. Tap the slide stock fitting. Have Homey J drill the hole, tap it for 1/8" NPT and you should be gold.


The first two are easier, the third option has the potential to be cheaper.