Hey Jason, Check this out.
Posted: Tue Sep 16, 2003 9:50 pm
Depends.
Apparently, laptop screens are a b!tch to mod. I'm pressuming this is one of those?
KalNet Message Board
KalNet Message Board
https://kalnet-mb.kalshadowtech.com/
Hey Jason, Check this out.
Page 1 of 1
Posted: Wed Sep 17, 2003 9:19 am
Posted: Wed Sep 17, 2003 4:44 pm
I think it mostly depends on what kind of connector the thing comes with. If it is a regular digital panel connector it would be no problem to mod. If it is some kind of proprietary molex then it could be pretty hard to get working.
Posted: Wed Sep 17, 2003 7:04 pm
It all depends on whether the screen requires a decoder. Often these are attached to the "mobo" of the laptop which makes things difficult. If, however, if uses RCA, S-video, serial, parallel, VGA, DVI, or even coax it should be relatively simple.
Posted: Thu Sep 18, 2003 12:34 am
I think the chances of it using coax are just about zero. Unless you mean digital coaxial, in which case the chances are zero. 
Posted: Fri Sep 19, 2003 4:01 pm
Coax = teh unlikely, but possible.
Digital coax = teh no.
Unless it projects visuals through sound. Only 5 grams of 'shrooms and LSD necessary every time you boot your comp.
Digital coax = teh no.
Unless it projects visuals through sound. Only 5 grams of 'shrooms and LSD necessary every time you boot your comp.
Posted: Fri Sep 19, 2003 4:51 pm
That could get expensive