KalNet Message Board

I want to compile a list of part numbers for all major paintball gun electronic plugs in common use. I know some of the information is scattered around PBN, but one central list would be helpful.

I am requesting that anyone who has information post it in the following format:

Model (Make)
Application
Part#

so, for example
"Intimidator (BLAST)
14 pt harness
Molex 51110-1450-P,Digi-key part number WM18056-ND for the 14 space connector contacts"

Thanks to an old parisinflames7 post for information on Timmies in example. Thanks to everyone who provides information to expand this list. Thanks to Ydna for the sheer bulk of information provided.

I continue to update the original post as information accumulates. Please feel free to post here or pm me with corrections. Hopefully this will build into a resource that is helpful for all of us. My hope is that this list will be exhaustive and all inclusive, but that will likely require continuing effort as new products are released.

************************************************** **

Intimidator (BLAST)

14 pt harness
Molex 51110-1450-P
Digi-key part number WM18056-ND for the 14 space connector contacts

12-pt harness
Molex 51110-1250-P
Digi-key part number WM18056-ND for the 12 space connector contacts

crimp terminals (tape...not free bulk)
Molex part# 50394-8100

Ego (Eclipse)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

breech sensor male plug
JST Zh series...4 circuit
JST P# ZHR-4
455-1202-ND

Eblade (Eclipse)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

breech sensor male plug
JST Zh series...4 circuit
JST P# ZHR-4
455-1202-ND

Racegun Autococker Frame

Molex 51021-0200, 0400, and 0600

*50058 crimps for them are for 28-32 awg wire. If you want to use 26 awg wire (someone above recommended it) then you would want to use the 50079-8100 terminals*

Ion (Smart Parts)

mainboard, eye wire harness connector (1-mm pitch, eSH series, 4 point, top entry)
JST part# BM04B-SRSS-TB

eye board, eye wire harness connector (1-mm pitch, eSH series, 4 point, side entry)
JST part# SM04B-SRSS-TB

Crimp housing with protrusions JST part# SHR-04V-S-B

Shocker SFT & Nerve (Smart Parts)

wire harness connector (1-mm pitch, eSH series, 10 point, side-entry)
JST part# SM10B-SRSS-TB

Crimp housing with protrusions JST part# SHR-10V-S-B
No point in buying the terminal crimps for these....they're impossible to crimp without using the proper tool.

*Shocker/Nerve I-LEB beam-break mods use the same conector as the Ion eye board.*

Shocker/Nerve Predator board (Vaporware?)

secondary crimp housing (used for programming and beam-break eyes) JST 1.5-mm pitch, 4 point, side entry
part# ZHR-4

Crimp terminals (tape...not free bulk) JST part# SZH-003T-P0.5

Shocker Sport (Smart Parts)

solenoid connector (ePH series, 4 point, side entry)
JST part# S4B-PH-SM4-TB

intellifeed connector header (eBH series, 3 point)
JST part# SM03(4.0)B-BHS-1-TB

Shocker Sport HSW S-Frame
8-pin 2-mm pitch dual row connector
Molex part# 51110-0850

Impulse (Smart Parts)

solenoid connector, crimp housing (ePH series, 2 point, side entry)
JST part# PHR-2

Crimp terminal, JST part# SPH-002T-P0.5S

Morlock Boards

Original:
Hirose DF11-12DS-2C from Digikey

Alternate:
12-pt harness
Molex part# 51110-1250

terminals
Molex part# 50394-8100

NME (System X )

6 pin (2x3 point)
Molex part# 51110-0650

8 pin (2x4 point)
Molex part# 51110-0850

crimp terminal
Molex part# 50394-8100.

Viking (AKALMP)

2-pin Housing
Molex P\N 51021-0200

3-pin Housing
Molex P\N 51021-0300

Crimps
Molex P\N 50079-8100

Excalibur (AKALMP)

2-pin Housing
Molex P\N 51021-0200

3-pin Housing
Molex P\N 51021-0300

Crimps
Molex P\N 50079-8100

Marq/Closer/Onyx (BLAST)

Crimp housing 2 point
Molex part# 51021-0200

Crimp housing 3 point
Molex part# 51021-0300

Crimp housing 4 point
Molex part# 51021-0400

Crimp terminal
Molex part number 50058-8100

Quest (FEP)

solenoid plug (on battery harness)
Molex - 51021-0200

solenoid plug (solenoid end)
Molex - 51074-0200

eye wire (4-pin style)
JST - 455-1202-ND

eye wire (3-pin style)
?

Bushmaster (ICD)

12-pt harness
Molex part# 51110-1250

terminals
Molex part# 50394-8100

Freestyle (ICD)

12-pt harness
Molex part# 51110-1250

terminals
Molex part# 50394-8100

Droid (Mac Dev)

male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

Cyborg (Mac Dev)

male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

Angel A1 (Angel Paintball Sports)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

Angel G7 (Angel Paintball Sports)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

Angel Speed (Angel Paintball Sports)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

Angel Fly (Angel Paintball Sports)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

Angel A4 (Angel Paintball Sports)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

Angel IR3 (Angel Paintball Sports)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

Angel LCD (Angel Paintball Sports)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

Angel LED (Angel Paintball Sports)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

Angel V6 (Angel Paintball Sports)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

Invert Mini (KEE)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

E-Matrix (Procaps/Airtech)

DM4 (Dye)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

DM5 (Dye)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

DM6 (Dye)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

DM7 (Dye)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

DM8 (Dye)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

PMR (Proto)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

PM4 (Proto)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

PM5 (Proto)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

PM6 (Proto)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

PM7 (Proto)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

PM8 (Proto)

solenoid male plug
JST, Zh Series connector...2 circuit
JST P# ZHR-2
digikey p# 455-1366-ND

Fusion(Dangerous Power)

Threshold (Dangerous Power)


NOTES FROM Ydna:
MOLEX PICO-BLADE:
Used on AKALMP, Tadao Ion boards, Alias Intimidator, Invert Mini solenoid connector, Marq/Onyx/Closer/etc, Quests, and others.
Crimp housing 2 point - Molex part# 51021-0200
Crimp housing 3 point - Molex part# 51021-0300
Crimp housing 4 point - Molex part# 51021-0400
...etc
Crimp terminal (bulk) Molex part number 50058-8100 - very small, hard to reliably crimp by hand, but not totally impossible.

MOLEX MILLI-GRID:
All the same series 2-mm pitch dual row connector, used in different point numbers on different guns.
6 pin (2x3 point) NME boards, Pulse RF transmitter - Molex part# 51110-0650
8 pin (2x4 point) NME, Shocker Sport HSW S-Frame - Molex part# 51110-0850
12 pin (2x6 point) Bushmasters (including Chaos boards), Morlock boards, Intimidators, Freestyles - Molex part# 51110-1250
14 pin (2x7 point) Intimidators - Molex part# 51110-1450
As mentinoed earlier the crimp terminal bulk is Molex part# 50394-8100.
Cheetah boards use a 1x5 point version of these 2-mm pitch connectors for their reprogramming interface, if that matters (though you probably already know that if you've reprogrammed a Cheetah board before...lol)